Dukane 8960WUSS Network Manual page 112

9. Troubleshooting
Phenomenon: The time settings are not correct.
Item to be checked
Is battery set?
Is the date and time set correctly? Check the settings of Date/Time Settings menu
Is the projector connected to the
network correctly when getting
the time via the network?
Is SNTP server set correctly
when getting the time via the
network?
Is the time difference set correctly
when getting the time via the
network?
Phenomenon: Cannot control the external device by using Network Bridge.
Item to be checked
Is Network Bridge settings
enabled?
Is STANDBY MODE set to
NETWORK(WOL) or SAVING?
Are the serial settings set
correctly?
Solutions
Set the battery.
The battery is considered to be exhausted if
the time is off soon after setting date and time.
In that case, replace the battery.
of the Projector Web Control or DATE AND
TIME menu of the projector.
Connect to the network.
Check the settings of SNTP server.
Consult with your network administrator
regarding the settings of SNTP server.
When getting the time via the network,
the correct time is not displayed if the time
difference is not set.
Set the time difference.
Solutions
Check the settings in OPTION - SERVICE -
COMMUNICATION - COMMUNICATION TYPE
menu.
The Network Bridge is not available when
STANDBY MODE is set to NETWORK(WOL)
or SAVING. Set STANDBY MODE to QUICK
START or NORMAL, and set NETWORK
BRIDGE (WIRELESS/WIRED) in the
COMMUNICATION TYPE menu.
Check the serial settings of the projector and
the external device.
112
QM00193 - 2