Network Bridge Function; Projector Management Using Snmp; Other Functions - Dukane 9005 User Manual

1.5 Network Bridge Function

This projector is equipped with the NETWORK BRIDGE function to perform
mutual conversion of a network protocol and a serial interface.
By making use of the NETWORK BRIDGE function, a computer connected to the
projector via wireless or wired LAN is able to control an external device via
RS-232C communication using the projector as a network terminal.
Computer
CONTROL port

1.6 Other Functions

1.6.1 E-mail Alerts
The projector can automatically send an alert message to the specified
e-mail addresses when the projector detects a certain condition that requires
maintenance or detects an error.

1.6.2 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the
projector information, which is a failure or warning status, from the computer on
the network. The SNMP management software will be required on the computer
to use this function.
TCP/IP data
Wired LAN
LAN cable
Wireless
LAN
Protocol change
RS-232C
RS-232C cable
WIRELESS port
(USB wireless adapter)
LAN port
Serial data
External device
5