How Do I Follow A Cloverleaf Pattern - Raymarine S1000 User Manual

81245_1.fm Page 15 Tuesday, December 7, 2004 10:08 AM

How do I follow a cloverleaf pattern?

When you enter CLOVERLEAF mode, the autopilot will use your
current position as the center point. The autopilot will then steer your
boat through a series of starboard turns, repeatedly intersecting the
start point.
press repeatedly until
MODE
you reach CLOVERLEAF
change pattern size
(Sml, Med or Large)
activates autopilot
PILOT
in CLOVERLEAF mode
CLOVERLEAF
You can change the pattern direction in
Quick Tip
PILOT SETUP (See section 3)
User Guide
1 2
3
From any screen:
1. Press MODE repeatedly until
CLOVERLEAF is displayed.
2. Use the PORT and
STARBOARD keys to change
the size (S, M or L) if required
3. Press the PILOT key to activate
the autopilot
15