Raymarine S1000 User Manual page 32

81245_1.fm Page 32 Tuesday, December 7, 2004 10:08 AM
Subsequent presses of mode will cycle through the various calibration
options.
Hardware and Software version numbers
Use this option to display the current hardware revision and the software
version numbers for the S1000 and S100. At VERSIONS, press the PILOT
key to display the information.
Contrast
Press PILOT if you wish to change the display contrast. Then, use the left
and right navigation buttons to adjust the contrast and press STANDBY to
save the setting.
Self test
Press PILOT to start the unit test sequence and then follow the on-screen
instructions. This will test the display, buzzer and button functions.
Diagnostics
Press PILOT to display the status of the wireless link.
Handset Registration
Raymarine wireless systems demand that each wireless controller is
"registered" to a basestation, in this case a S1000. This registration process
is to prevent unauthorized control of your boat by another user nearby. Your
S1000 system is supplied with the handset pre-registered to the S1000.
There may be instances where you want to move your controller to another
boat and use it with another system. In this case, you will need to de-register
from the current system and register with the new system. You can do this
using the REGISTRATION function.
Note: For best results always perform registration and de-registration with
the S100 handset close to the S1000
32 User Guide