How Do I Follow A Cloverleaf Pattern - Raymarine S1000 User Manual

How do I follow a cloverleaf pattern?

When you enter CLOVERLEAF mode, the autopilot will use your
current position as the center point. The autopilot will then steer your
boat through a series of starboard turns, repeatedly intersecting the
start point.
press repeatedly until
MODE
you reach CLOVERLEAF
change pattern size
(Sml, Med or Large)
activates autopilot
PILOT
in CLOVERLEAF mode
CLOVERLEAF
Quick Tip
14
1 2
From any screen:
1. Press MODE repeatedly until
2. Use the PORT and
3. Press the PILOT key to activate
You can change the pattern direction in
PILOT SETUP (See section 3)
3
CLOVERLEAF is displayed.
STARBOARD keys to change
the size (S, M or L) if required
the autopilot
Raymarine S1000 Autopilot