Ecofeedback Consumption Indicator - Miele G 7960 Operating Instructions Manual

EcoFeedback consumption in-
dicator
You can view information about the en-
ergy and water consumption of your
dishwasher (see "Settings" chapter,
"Consumption" section).
The following information will appear in
the display:
– Estimated energy and water con-
sumption before the programme se-
quence begins.
– Actual energy and water consump-
tion at the end of a programme.
– The total consumption of the dish-
washer.
1. Consumption estimate
You can display the predicted energy
and water consumption in the Extras
menu of the selected programme using
the 
Estimate function.
The estimated consumption will be
shown as a bar chart. The more bars
displayed, the higher the energy or wa-
ter consumption of the selected pro-
gramme.
The values are influenced by the pro-
gramme, the extras selected, the ambi-
ent conditions and the size of the load.
The estimated consumption function is
activated as standard. This function can
be deactivated, if preferred (see "Set-
tings", "Consumption" section).
2. Displaying consumption
At the end of the programme, you can
call up the actual energy and water
consumption for the programme that
has just been run.
Caring for the environment
 Open the door at the end of the pro-
gramme.
 Select the 
Consumption
The energy and water consumption of
the programme that has just run is dis-
played.
Switching the dishwasher off at the
end of the programme will delete the
actual consumption values for the pro-
gramme that has just been run.
3. Total consumption
You can view the total consumption of
energy and water for all previously used
programmes of your dishwasher (see
"Settings" chapter, "Consumption" sec-
tion).
function.
33