Heat Accumulator - Miele G 7960 Operating Instructions Manual

Heat accumulator

This dishwasher is equipped with a heat
accumulator (see "Caring for the envir-
onment" chapter, "EcoTech heat accu-
mulator" section).
Select State
The heat accumulator function can be
switched off if you do not wish to use it.
 Select the
State
 Select the setting you want and con-
firm with OK.
Empty manually
You can manually empty the heat accu-
mulator, e.g. for a longer period of ab-
sence, or before moving the appliance
to a new location.
 In doing so, please ensure that the
dishwasher is properly connected.
 Select the
Empty manually
tion.
The process starts straight away.
menu option.
menu op-
Software version
You can call up the electronic software
version of your dishwasher for technical
support purposes.
Legal information
You can view legal information about
the open source licences for your dish-
washer.
Showroom
For demonstration purposes only.
The dishwasher is equipped with a
demo mode for showroom use.
Factory default
You can reset all the dishwasher set-
tings and its network configuration to
the factory default settings.
WiFi module settings (where applicable)
have to be reset separately.
Appliance settings
You can use this menu option to reset
all dishwasher settings, except WiFi
module settings, to the factory default
settings.
Network configuration
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
Settings
121