Cisco Catalyst 4500 E Series Supervisor Engine 9-E Installation And Configuration Note page 8

Call Feature
Out
10 and 40-GE uplink ports
11
For physical and environmental specifications of the Supervisor Engine 9-E, refer to data sheet at the following
www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/nb-09-cat-4500e-sup-engine-ds-cte-en.html
Cisco Catalyst 4500 E-Series Supervisor Engine 9-E LEDs
The following figure shows the front view of the supervisor engine, with the LEDs identified. See the corresponding callout number
column in the table for a description of the LED.
Figure 2: Cisco Catalyst 4500 E-Series Supervisor Engine 9-ELEDs
8
Description
The supervisor engine has two 40-GE ports. These ports use QSFP+
transceivers.
Ports are numbered 1 and 2 and have individual LEDs that indicate uplink
status.
The ports also have individual ACTIVE LEDs that indicate the active port.
See Cisco Catalyst 4500 E-Series Supervisor Engine 9-E LEDs, on page
8
For more information about uplink ports, see Uplink Ports, on page 16
URL:https://