Configuring The Tc Analog Inputs - Siemens Simatic S7 Series System Manual

6.1.13

Configuring the TC analog inputs

Click the TC (Thermocouple) analog input node of the system block (Page 115) dialog to
configure options for a TC analog input module that you have selected in the top section.
The TC analog expansion module measures the value of voltage connected to the module
inputs.
Thermocouple type configuration
For each TC analog input module channel, you configure the type, choosing one of the
following options:
● Thermocouple
● Voltage
S7-200 SMART
System Manual, 09/2015, A5E03822230-AC
6.1 Configuring the operation of the PLC system
PLC device configuration
139