Creating New Group And Gateway; Creating A New Unit Group (Network); Creating New Gateways (Voip Gateway Card) - Panasonic KX-TDA0480 Getting Started

3.2 Creating New Group and Gateway

3.2 Creating New Group and Gateway
When first setting up a VoIP network, a Unit Group must first be created. Once a new Unit
Group has been created, New Gateways can be added to the group. Refer to the following
steps and examples given in "1.2 Network Devices and Numbering Plan" to create new Unit
Group and Gateways.
3.2.1

Creating a New Unit Group (Network)

3.2.2

Creating New Gateways (VoIP Gateway Card)

Each newly installed VoIP Gateway Card must first be initialised with new IP addressing,
through direct RS-232C connection between the card and the PC (see "2.2.1 RS-232C Cable
Connection"). Once this is done, the Gateways will be able to communicate with each other on
the network.
Note
To perform the following operation, the COM port being used on the PC must be properly
selected (see "3.1.4 RS-232C Port Setting").
24 Getting Started
1. Click "Unit" "New"
menu bar.
2. a.
Type the Group Name and Comment.
b.
Click [OK].
1. a.
Click the Unit Group you have created
above in the Groups Window Pane.
b.
Click "Unit"
the menu bar.
Note: Do not select "New Gatekeeper",
"New VoIP-TA", or "New Other unit".
"Group" from the
"New" "Gateway" from