2.1 Installation
2.1.4
Indication Light (LED)
When the VoIP Gateway Card is connected to the LAN with a 10BASE-T cable (see "2.2.2
10BASE-T Cable Connection"), each LED should show the status identified in bold-faced
letters under normal operation.
16
Getting Started
CARD
Green/Red Off: Power off
STATUS
LEDs
ON LINE
Green
ALARM
Red
IAM BUSY Green
LINK
Green
DATA
Green
COL
Green
SIOSEL
Green
Green On: Normal (all ports are idle)
Green Flash (60 times per minute): Normal (a
port is in use)
Red On: Fault (includes reset)
Red Flash (60 times per minute): Out of Service
On: On-line mode
Flash: Emergency maintenance mode
Off: Normal
On: Alarm
Off: Not used
On: At least one line is used
Off: Connection error
On: Normal connection
Off: No data transmitted
On: Data transmitting
Off: No data collision
On: Data collision
Off: CPU power port used (Maintenance port
not available)
On: Maintenance port available