Table of Contents
Advertisement
Getting started
Battery installation and charging
After you install your telephone or power returns following
a power outage, the handset will prompt you to set the
date and time. For instructions, see Set date/time on page
33. To skip setting the date and time, press
/CANCEL on the handset.
OFF
After the date and time setting is done or skipped, the
handset will prompt if you want to set Smart call blocker.
Press
/SELECT to start the Smart call blocker setup
MENU
via voice guide. For more details, see Voice guide to set
Smart call blocker on page 94. To skip the setup, press
/CANCEL twice.
OFF
After the Smart call blocker setting is done or skipped,
the handset will then prompt if you want to set up the
answering system. Press
answering system setup via voice guide. For more details,
see Voice guide to set Answering system on page 105.
To skip the setup, press
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery
f
(model BT162342/BT262342). To order, visit our website at
https://telephones.att.com
1 (866) 288-4268
dial
If you do not use the handset for a long time, disconnect and remove the
f
battery to prevent possible leakage.
/SELECT to start the
MENU
/CANCEL.
OFF
or call
.
12
1 (800) 222-3111
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO
Voice guide set
ECO
Smart call blk?
ECO
Voice guide to...
ECO
set up Ans sys?
ECO
. In Canada,
Advertisement
Table of Contents
