Table of Contents
Advertisement
Appendix
Screen messages
Number repeated
Out of range or
no pwr at base
** Paging **
Put in charger
Quiet mode off
Quiet mode on
Rec mem low
Rec mem full
Ringer muted
Screened call
Setting Ans sys
Speaker
To register HS...
...see manual
To screen call
press [SELECT]
Unable to call
XX missed calls
XX new messages
The telephone number you have entered is already stored in the
directory.
The handset has lost communication with the telephone base.
The telephone base is paging all handsets.
The battery is very low. The handset should be placed in the
telephone base or charger.
The quiet mode is turned off.
The quiet mode is turned on.
The answering system has less than 3 minutes to record.
The answering system memory is full.
The ringer is muted temporarily during an incoming call.
The Smart call blocker feature of the telephone has screened a call
and is putting the call through to you.
The handset is playing voice guide.
The handset speakerphone is in use.
The handset is not registered to any telephone base.
The system is recording a message. Press
call on a handset.
Intercom failed.
X
You try to join a call when there are already four handsets on
X
that call.
You try to make a call when the handset is out of range.
X
There are XX new calls in the caller ID log.
There are XX new messages in the answering system.
127
/SELECT to screen a
MENU
Advertisement
Table of Contents
