Resetting The Date And Time - Sony TRV315 Operating Instructions Manual

Resetting the date and time

The clock is set to East Coast Standard Time at the factory.
The date and time are held in memory by the lithium battery. If you replace the lithium
battery with the battery pack or other power source connected, you need not reset the
date and time.
You must reset the date and time when the lithium battery becomes dead with no
power source installed.
First, set the year, then the month, the day, the hour and then the minute.
(1) While the camcorder is in the standby mode, press MENU to display the
MENU settings.
(2) Turn the SEL/PUSH EXEC dial to select
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MENU to make the MENU settings disappear.
1,
MENU
7
4
1999 JAN 1 1999 JAN
12 00 AM
12 00 AM
The year changes as follows:
1998 ˜ 1999 N · · · · n 2029
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
• 12:00 AM stands for midnight.
• 12:00 PM stands for noon.
2
S E T U P M E N U
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
6
S E T U P M E N U
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
RETURN
1
[MENU] : END
, then press the dial.
S E T U P M E N U
CLOCK SET JAN 1 1998
AUTO TV ON 12: 00:00AM
TV INPUT
LTR SIZE
DEMO MODE
RETURN
[MENU] : END
S E T U P M E N U
CLOCK SET
AUTO TV ON
JUL 4
1999
TV INPUT
LTR SIZE
DEMO MODE
RETURN
5 30 PM
[MENU] : END
3
S E T U P M E N U
CLOCK SET
AUTO TV ON
JAN 1
1998
TV INPUT
LTR SIZE
DEMO MODE
RETURN
12 00 AM
[MENU] : END
JUL 4 1999
5:30:00PM
59