Playing Back A Tape With Digital Effects - Sony TRV315 Operating Instructions Manual

Playing back a tape with digital effects

During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial
until the desired digital effect indicator (STILL, FLASH, LUMI. or TRAIL)
flashes.
(2) Press the SEL/PUSH EXEC dial.
The digital effect indicator lights up and the bars appear. In the STILL or
LUMI. mode, the picture where you press the SEL/PUSH EXEC dial is stored
in memory as a still picture.
(3) Turn the SEL/PUSH EXEC dial to adjust the effect.
For details of each digital effect function, see page 34.
1
DIGITAL
EFFECT
STILL
To cancel the digital effect function
Press DIGITAL EFFECT.
Notes
• The digital effect function works only for tapes recorded in the Digital8
• You cannot process externally input scenes using the digital effect function.
• To record pictures that you have processed using the digital effect function, record the
pictures on the VCR.
Pictures processed by the digital effect function
Picture processed by the digital effect function are not output through the DV IN/
OUT jack.
When you set the POWER switch to OFF or stop playing back
The digital effect function is automatically canceled.
2
STILL
3
system.
43