Advanced System Tuning With The System Tuning Extension - Barco Iosono Core R9801500 Installation And User Manual

8. ADVANCED SYSTEM TUNING WITH THE SYSTEM
TUNING EXTENSION
About
This chapter gives an overview about the process of acoustical tuning of an IOSONO system. The desired result of acoustical tuning
is a system performing at its best with the given gear in the given space. The IOSONO system's overall frequency response and level
shall follow the IOSONO recommendations which ensure comparable conditions across all IOSONO systems and transparency in
content interchange.
While IIR filters and gains can be set and controlled in the Control Unit itself, the advanced tuning using automatically generated
individual FIR filters based on acoustical measurements, is executed using the System Tuning Extension. The System Tuning
Extension is an optional feature and is not part of the basic feature set.
8.1 Hardware Connections
About
A wiring scheme of a system setup for acoustical measurements, based on the standard setup described in "Hardware Connections",
page 41, is shown below in image 8-1.
Image 8-1
Typical wiring of a tuning setup
8.2 Settings
To set up the System Tuning Extension
1. To enable the System Tuning Extension, go to menu System - Options - Extensions
- Select System Tuning
- Click Enable
- Click OK to confirm (image 8-2)
Note: A valid loudspeaker file must be present in the Control Unit before enabling the System Tuning extension. The symbol
on the left of each available extension changes from a grey circle to a red dash when enabled.
2. The tab bar will show an additional icon representing the System Tuning Extension. Navigate to the extension by clicking the
Mic-Icon in the tab bar (image 8-3)
R5906746 IOSONO CORE 08/05/2017

8. Advanced System Tuning With The System Tuning Extension

49