Table of Contents
Advertisement
13.Click OK to leave the option menu
Image 7-2
Simple 3D model of the created loudspeaker setup
7.1.3
Preset Configuration
7.1.3.1
General Preset Configuration
To configure a preset
1. In the Presets menu, press New and assign a Preset Name, e.g. Live
-
Click OK to confirm
2. The view switches to the Preset details tab with a tree structure on the left. In General Loudspeaker Setup select the file created
before Live and keep Visibility checked
Note: Ignore the Filtering tab for the time being. This feature is explained in detail in "Filter Creation", page 23. In Devices and
Services the IOSONO CORE should be the used device.
3. In IOSONO CORE move Processing, I/O Control and Scene Designer from Available Services to Used Services with <
4. In the tree structure, go to I/O Control - Configuration and click Autodetect. The displayed configuration should match your
purchased hardware configuration with the IOSONO CORE. (E.g.: in case of I/O Config M, 1x MADI should be selected) - in
Synchronization choose a suitable setting according to your setup
5. In the tree structure, go to Processing - General tab and choose in Buffer Size 128 samples for low system latency
-
Click Active in Renderer
-
Click Auto Configuration
-
OK the warning dialog
-
Select a Number of Live Input Channels according to the number of real inputs from your mixing console
Note: see "Latency Minimization", page 40 for delay minimization techniques and related trade-offs, for further explanations,
see "Services", page 26.
Note: Because the loudspeaker file has 4 loudspeaker groups (Stereo P.A., Nearfills, Surrounds and Subwoofer) the software
creates 4 render slots automatically.
6. Go to the Input Routing tab - make individual routing in the provided matrix if necessary or keep default diagonal line if your live
inputs feed into the IOSONO CORE in a linear fashion.
Note: The rows represent your input signals from the external audio signal source at the physical audio inputs while the columns
represent the virtual sources as renderer input channels.
7. Go to tab Render Slot 1
-
Select loudspeaker group Nearfills
-
Select IOSONO in Algorithm Selection
-
In Settings keep default selection of flags
-
Select Static Scene Rendering
-
Turn Prefilter ON (see "Latency Minimization", page 40 for further explanation of these values and delay minimization tech-
niques and trade-offs.)
-
In Slot Settings uncheck the Source Trait dialog
Note: In Slot Settings you may adjust the source latency, minimized source latency and slot gain with regards to the other
render slots. Have the same delay time in all render slots (as automatically set) for the sound to arrive at the same time
at the center of the audience area from all loudspeaker groups. Adjust the delay time of the individual render slots to
exploit the Haas effect in live sound reinforcement.
8. Go to tab Render Slot 2
R5906746 IOSONO CORE 08/05/2017
7. Step-By-Step Configuration
35
Advertisement
Table of Contents
