White Balance Memory; Gain Value; Shutter Speed; Remaining Clips Display - Sony PDW-700 Operation Manual

Indicates the currently selected filter type (see
page 16).
l White balance memory
Indicates the currently selected white balance
automatic adjustment memory.
A: Displayed when the WHITE BAL switch is set
to A.
B: Displayed when the WHITE BAL switch is set
to B.
P: Displayed when the WHITE BAL switch is set
to PRST or when the preset button on an RM-
B150 has been pushed.
T: Displayed when ATW is being used.
3200: Displayed when the COLOR TEMP SW
3200K function is set to ON.
4300: Displayed when the COLOR TEMP SW
4300K function is set to ON.
5600: Displayed when the COLOR TEMP SW
5600K function is set to ON.
6300: Displayed when the COLOR TEMP SW
6300K function is set to ON.
m Timecode
Indicates the elapsed recording/playback time,
timecode, user bits or other information selected
by the DISPLAY switch (see page 22).
n Gain value
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN selector.
o Shutter speed
Indicates the shutter speed or the shutter mode.
However, if the SHUTTER selector (see page 16)
is set to OFF, nothing is displayed.
For details of the displayed shutter speed, see
"Setting the Electronic Shutter" on page 56.
p Operation/alarm message display area
For details, see "Operation/alarm messages" on
page 193.
q Audio level
Indicates the level of audio channel 1 and channel
2. The peak indication of the VDR level meter is
related as follows to the audio level.
32 Locations and Functions of Parts and Controls
1
2
3
-52 -28
1Audio channel 1 level indicator
2Audio channel 2 level indicator
3VDR level meter indicator
The segment colors change from gray to white at
or above the AU REF LEVEL set on the AUDIO-
2 page of the MAINTENANCE menu. This
setting does not affect the relationship between
the number of lit segments and the audio levels.
The example in the above figure shows the colors
when AU REF LEVEL is set to –20 dB.
r Remaining disc capacity
Indicates the remaining recording time (in
minutes) of the disc.
Examples of remaining recording time indication
Indication Remaining recording
time
90 < More than 90 minutes
90 - 85 90 to 85 minutes
85 - 80 85 to 80 minutes
. .
. .
. .
20 - 15 20 to 15 minutes
15 - 10 15 to 10 minutes
10 - 5 10 to 5 minutes
5 - 0 5 to 0 minutes
No display 0 minute
s Remaining clips display
Displays the remaining number of clips that can
be recorded. The display flashes once per second
when the number of remaining clips is less than
10.
t Iris setting/auto iris override
Indicates the F value (iris setting) of the lens.
Auto iris override is shown by an indicator made
up of two segments each on the upper and lower
sides.
For details, see "Changing the Reference Value for
Automatic Iris Adjustment" on page 59.
u Setting change and adjustment
progress message display area
For details, see "Change confirmation/adjustment
progress messages" on page 149.
-20 -12 -8 (dB)