Editing Tracks; Adding A Mark To A Track; Using A Track Mark - Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual

Editing Tracks

Adding a Mark to a Track

Using a track mark

Adding a track mark
You can add a track mark at a point at
which you would like to divide a track later
or locate during playback.
You can add a maximum of 98 track marks
to each track.
During recording, playback, or pausing,
press the T-MARK button at the position
you want to add a track mark.
60 GB
> FF/ v ,
. FR/ V
MENU
N PLAY/ENTER
T-MARK
x STOP
The (track mark) icon flashes three
times, and a track mark is added.
Using the remote commander
z
When the supplied remote commander is
connected, you can also press T-MARK button
on the remote commander to add a track mark.
P Notes
• You can add a track mark only to a track
recorded using the PCM recorder. You
cannot add a track mark to an MP3/WMA/
AAC-LC (m4a)/LPCM (WAV) file copied
from a computer.
• You cannot add a track mark at a point
within 0.5 seconds from another track mark.
• You cannot add a track mark at the very
beginning or at the very end of the track.
• If there are already 98 track marks in a track,
you cannot add any more track marks.
• When a track mark is added during
playback, the playback stops.