To Stop Recording - Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual

To stop recording

Press STOP.
x
The ACCESS indicator flashes in orange and the PCM
recorder stops at the beginning of the current recording.
Note while accessing
The PCM recorder is recording data and saving it in memory when the ACCESS indicator flashes
in orange. While the PCM recorder is accessing data, do not remove the batteries, plug or unplug
the AC power adaptor or connecting cables. Doing so may damage the data.
Other operations
pause recording
release pause and resume
recording
Tips
z
• You can record up to 99 tracks in each folder.
• When an excessive recording level (exceeding –1 dB) is detected during the recording standby
mode, the peak level L/R OVER indicators light in red and the following level guide is displayed.
You may solve the problem by moving the PCM recorder far from the sound source, or setting the
MIC SENS(ATT) switch to "LOW." If the problem persists, use manual recording (page 33).
24 GB
Press X PAUSE. During recording pause, "
display window.
Press X PAUSE again or press N PLAY/ENTER
resumes from that point. (To stop recording after pausing recording,
press x STOP.)
x STOP
" flashes in the
.
Recording