Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual page 111

Error message
New Track
Only Effective During
MANUAL Recording Mode
Level Too High
Set MIC SENS to LOW
Or Adjust MIC Position
Continue Recording in
Different Memory
Change Folder
Deleted T-MARK(Track
Marks) Too Close to Divided
Position
Invalid when LINE OUT
Setting
System Error
Cause/Remedy
• The file size of the track being recorded has reached the maximum
file size: 1 GB for MP3 files, and 2 GB for a LPCM file. The file
will be divided automatically and recording will continue as a new
track.
REC LEVEL
• When the
recording), you cannot enable "LIMITER" in the menu.
REC LEVEL
• When the
recording), the message is displayed when the PCM recorder
detects the microphone level is too high to continue automatic
recording. If the MIC SENS(ATT) switch is set to "HI," set it to
"LOW." Or, place the PCM recorder far from the sound source. If
the message persists, switch the
" MANUAL" (manual recording).
• When the "Cross-Memory Recording" in the menu is enabled and
the memory currently being used becomes full during recording,
the PCM recorder switches to the other memory and continues
recording.
• If there are no tracks in the
the display window. Only a folder with a track will be displayed.
• When there is a track mark set within 0.5 seconds from the
dividing position, the track mark is automatically deleted.
• When "Audio Out" is set to "LINE OUT," the sound volume
adjustment with the VOLUME +/– buttons is disabled. Set the
"Audio Out" to "Headphones."
• A system error other than the above has occurred. Remove the
batteries and re-insert them.
switch is set to "AUTO" (automatic
switch is set to "AUTO" (automatic
REC LEVEL switch to
folder, no folders are displayed in
111 GB