Remote Commander - Sony HVR-Z1E Operating Instructions Manual

Remote Commander

A TC RESET button (p. 103)
B DISPLAY button (p. 51)
C SEARCH MODE button (p. 56)
D ./> buttons (p. 56)
E Video control buttons (Rewind,
Playback, Fast-forward, Pause, Stop,
Frame, Slow, ×2) (p. 49)
F Transmitter
After turning on your camcorder, point
towards the remote sensor to control your
camcorder.
G REC START/STOP button (p. 21)
H DATA CODE button (p. 52)
I Power zoom button (p. 23)
To insert the batteries
1
Press and pull out the cover of the
battery compartment.
132
Quick Reference
2
Insert 2 R6 (size AA) batteries by
matching the + and – on the batteries to
the + and – in the battery compartment.
3
Replace the cover back until it clicks.
b Notes on the Remote Commander
• Point the remote sensor away from strong light
sources such as direct sunlight or overhead lighting.
Otherwise, the Remote Commander may not
function properly.
• The Remote Commander may not function properly
when the remote sensor is obstructed with a
conversion lens (optional).
• When you are operating with the Remote
Commander supplied with your camcorder, your
VCR may also operate. In that case, select a
commander mode other than VTR 2 for your VCR,
or cover the sensor of your VCR with black paper.