Dubbing Sound To A Recorded Tape - Sony HVR-Z1E Operating Instructions Manual

Dubbing sound to a
recorded tape
Preparing for audio dubbing
Internal
microphone
Signal flow
1
Input audio in one of the following
ways.
• Using the internal microphone (no
connection required).
• Connecting a microphone or an audio
device (optional) to the INPUT1/INPUT2
connectors. (A)
• Connecting an audio device (optional) to
the AUDIO/VIDEO jack. (B)
2
Select the (AUDIO SET) menu,
[MIC SELECT], then [XLR] (p. 66).
BAUDIO/VIDEO jack
INPUT1/INPUT2
PHANTOM switch
AINPUT1/INPUT2 connectors
You can record additional audio to the
original sound on a tape recorded in the
DVCAM format and the FS32K audio mode.
Audio device (such as a
CD/MD player)
Audio output jacks
Do not connect the
Video plug (yellow).
A/V connecting cable
(supplied)
To use the internal microphone, select
[INTERNAL MIC].
3
When using the INPUT1/INPUT2
connectors, set the menu items in
accordance with the connector and the
connected device.
To use a microphone
• When the microphone is connected to the
INPUT1 connector, set [INPUT1
LEVEL] to [MIC].
Audio R
(red)
Audio L
(white)
Microphone (optional)
,continued
99
Dubbing/Editing