Rec Format; Rec Mode - Sony HVR-Z1E Operating Instructions Manual

REC FORMAT

REC MODE

72
Using the Menu
– at [HDV], an HDV signal is converted to an audio-unlocked DV signal; a DV signal is
not output.
– at [DV], a DV signal is output as it is; an HDV signal is not output.
• An HDV signal cannot be converted to a DVCAM signal.
Selects a recording format when the POWER switch is set at CAMERA. The
format lamp of the selected format will light up during recording.
GHDV1080i Select to record using the HDV1080i specification.
( )
DV Select to record in the DVCAM/DV format. In addition, you need to
( )
set [
Tip
z
• When you output the picture during recording simultaneously to a connected device using
an i.LINK cable, also set [i.LINK CONV] accordingly (p. 74).
This setting is valid only when [REC FORMAT] is set to [DV].
GDVCAM Select to record in the DVCAM format on the tape.
( )
DV SP ( ) Select to record in the SP mode of the DV format when you want to
record for a long time on the tape.
Note
b
• You cannot add sound on a tape recorded in the DV SP mode.
• If you record in the DV SP mode, a mosaic-like disturbance of picture may appear or sound
may be interrupted when you play back the tape on other camcorders or VCRs.
• When you mix recordings in the DVCAM mode and in the DV SP mode on one tape, the
playback picture may be distorted or the time code may not be continued properly between
the scenes.
REC MODE] below.