Step 3: Charging The Battery Pack - Sony HVR-V1E Operating Manual

Step 3: Charging the battery pack

You can charge the battery by
attaching the "InfoLITHIUM" battery
pack (L series) to your camcorder.
b Note
• You cannot use batteries other than the
"InfoLITHIUM" battery pack (L series)
(p. 127).
DC plug
AC Adaptor
1
Press the battery pack and slide it
down.
22
DC IN jack
To the wall
socket
Mains lead
2
With the B mark on the DC plug
facing the cassette compartment,
connect the AC Adaptor to the DC
IN jack on your camcorder.
3
Connect the mains lead to the AC
Adaptor.
4
Connect the mains lead to the
wall socket.
5
Set the POWER switch to OFF
(CHG).
The CHARGE lamp lights up and
charging starts.
B mark