4K Upscale Setting; 3D Output Setting; Hdmi Deep Colour Output; Dvd-Rom - Sony UBP-X800M2 Operating Instructions Manual

[DVD-ROM]

[Auto]: Outputs 24 Hz video signals only
when you connect a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[Data content]
This function is available for playback
contents stored in USB memory or data disc.
[Auto]: Outputs 24 Hz video signals only
when you connect a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[Network content]
This function is available for playback
contents from other network, such as Home
Network, etc.
[Auto]: Outputs 24 Hz video signals only
when you connect a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
 [4K Upscale Setting]
[Auto1]: When playing back video other than
4K, outputs 2K (1920 × 1080) video signals if
connected to Sony 4K-compatible
equipment, and outputs 4K video signals if
connected to non-Sony 4K-compatible
equipment.
The signals are upconverted to 4K video
signals by the equipment.
[Auto2]: Automatically outputs 4K video
signals when you connect 4K-compatible
equipment.
[Off]: Turns off the function.

• If your Sony equipment is not detected when
[Auto1] is selected, the setting will have the
same effect as [Auto2] setting.
• When playing back photos or playing back
video through network services, the same
effect as the [Auto2] setting is applied
regardless of this setting.
• During 3D playback of 3D video, the same
Off
effect as the [ ] setting is applied regardless
of this setting.
• Depending on the connected equipment and
combination with other settings, the display
may not match this setting.
 [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the connected
TV type, and switches to the matching colour
setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Outputs RGB video signals.

Not available when [Dolby Vision Output] is set
to [On].
 [HDMI Deep Colour Output]
[Auto]: Outputs 12bit/10bit video signals
when the connected TV is compatible with
Deep Colour.
[Off]: Select this when the picture is unstable
or colours appear unnatural.

Not available when [Dolby Vision Output] is set
to [On].
 [IP Content NR]
[Auto] / [Strong] / [Medium] / [Mild]: Adjust
the picture quality for Internet content.
[Off]: Turns off the function.
 [3D Output Setting]
[Auto]: Normally select this.
[Off]: Select this to display all content in 2D or
to enjoy 4K output using 3D content.

Not available when [Dolby Vision Output] is set
to [On].
 [TV Screen Size Setting for 3D]
Sets the screen size of your 3D-compatible
TV.

Not available when [Dolby Vision Output] is set
to [On].
 [TV Type]
[16:9]: Select this when connecting to a wide-
screen TV or a TV with a wide mode function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide mode function.
21