Network Connection; Wired Setup - Sony UBP-X800M2 Operating Instructions Manual


Non-4K Sound Bar/AV amplifier (receiver) without HDMI IN
 If selecting this connection method, set [HDMI Audio Output] in [System Settings] to
[HDMI1] or [Auto] (page 25).
* Premium High Speed HDMI Cable or High Speed HDMI Cable that supports 18 Gbps bandwidth.

• To display images in higher-definition HDMI formats, you need to connect the player to your TV using
a Premium High Speed HDMI Cable that supports 18 Gbps bandwidth (not supplied).
• To enjoy Dolby Vision, set [Dolby Vision Output] under [Screen Settings] on the player (page
• If you encounter any problems or need more information, refer to "Troubleshooting" (page 27).

3: Network Connection

If you are not going to connect the player to a network, proceed to "4: Easy Setup" (page 13).

• For details on settings for network connection, see [Network Settings] (page 25).
• When the player is connected to the Internet and there is a software update, the update notification
automatically appears on the screen.

Wired Setup


The use of a shielded and straight interface cable (LAN cable) is recommended.
12
To HDMI
OUT 1 jack
HDMI Cable* (not supplied)
LAN cable
(not supplied)
Coaxial digital cable
(not supplied)
Audio signals
Video signals
LAN cable
(not supplied)
Router
20
).
Modem Internet