Table of Contents
Advertisement
Wireless Setup
No cable assembly required between the player and the wireless LAN router.
4: Easy Setup
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
1 Insert two R03 (size AAA) batteries by
matching the + and – ends on the batteries
to the markings inside the battery
compartments of the remote.
2 Plug the player into the mains.
to mains
3 Press to turn on the player. Power
indicator lights up.
LAN cable
(not supplied)
Wireless LAN
Router
4 Turn on the TV and press TV on the
remote to set the input selector. This will
show the signal from the player on your TV
screen.
5 Perform [Easy Setup].
Follow the on-screen instructions to make
the basic settings using /// and
press ENTER on the remote.
///
ENTER
• When [Easy Setup] is complete, select [Easy
Network Settings] to use the network functions
of the player.
• To enable wireless connection, set [Internet
Settings] in [Network Settings] to [Wireless
Setup].
• To disable wireless connection, set [Internet
Settings] in [Network Settings] to [Wired
Setup].
• If there is no output or black screen appears,
refer to "Troubleshooting" (page 27).
Modem
Internet
13
Hide quick links:
Advertisement
Table of Contents
