Parameterization Of The Cp - Siemens SIMATIC S7 Manual

3.2

Parameterization of the CP

Parameterization
of the CP
OPEN MODBUS / TCP communication via CP343-1 and 443-1
2XV9450-1MB00; Manual edition 4.3
If you have your stations connected with each other without a router, then
they have to be within the same subnet.
In the field Subnet connect the CP with the Industrial Ethernet. In order to do
that, select the entry with the name of your network. For newly created
networks this is normally "Ethernet(1)".
Save and Compile the parameterization.
Commissioning
3-2