3.3
Network Configuration
Communications
Connection
Configure Network
in mode "CP is
Client"
OPEN MODBUS / TCP communication via CP343-1 and 443-1
2XV9450-1MB00; Manual edition 4.3
2) Properties – Other Station General
In tab "General" you do not have to make any settings.
The CP is the link for the Industrial Ethernet connection between the S7-CPU
and the communication partner / bus. A connection configuration must be
made for the connection of the interfaces to the communication partner / bus.
In the STEP7 project, select the CPU in your S7 300/S7 400-Station and open
"Network configuration" by double clicking "Connections". This opens the
program "NetPro" with which your connections can be configured.
Commissioning
3-4