Diagnostic Messages Of Fc5/Fc6 And Fc50/Fc60; Diagnostic Messages Of Included Fcs/Sfcs; Diagnostic Messages Of Sfc24 - Siemens SIMATIC S7 Manual

6.3

Diagnostic Messages of FC5/FC6 and FC50/FC60

Diagnostic messages of the included blocks AG_SEND/AG_RECV (FC5/FC6) and
AG_LSEND/AG_LRECV (FC50/FC60) at the output STATUS
STATUS Event text
(Hex)
7xxx For detailed information please refer to the online help
of SIMATIC Manager.
8xxx For detailed information please refer to the online help
of SIMATIC Manager.
6.4

Diagnostic Messages of included FCs/SFCs

Diagnostic messages of the included blocks RD_SINFO (SFC6), BLKMOV (SFC20) , SFC51
(RDSYSST), SFC52 (WR_USMSG) and AG_CNTRL at the output STATUS
STATUS Event text
(Hex)
7xxx For detailed information please refer to the online help
of SIMATIC Manager.
8xxx For detailed information please refer to the online help
of SIMATIC Manager.
6.5

Diagnostic Messages of SFC24

Error messages of SFC24
STATUS Event text
(Hex)
80A1 DB Number = 0 or too large for the CPU
80B1 The DB does not exist in the CPU.
80B2 DB UNLINKED
OPEN MODBUS / TCP communication via CP343-1 and 443-1
2XV9450-1MB00; Manual edition 4.3
Remedy
See online help (SIMATIC
manager -> mark block -> key F1
–> Ethernet -> see also -> code
evaluation )
See online help (SIMATIC
manager -> mark block -> key F1
–> Ethernet -> see also -> code
evaluation )
Remedy
See online help (SIMATIC
manager -> mark block -> key F1)
See online help (SIMATIC
manager -> mark block -> key F1)
Remedy
Choose a valid DB number.
All data blocks that are specified
in db_x must be created and
copied into the CPU.
DB must not be created as
UNLINKED.
Diagnostics
6-8