Seasonal Checklist - Heatilator CALIBER DESIGNER B-VENT SERIES Installation And Operating Instructions Manual

Hide thumbs Also See for CALIBER DESIGNER B-VENT SERIES:
Table of Contents

Advertisement

CALIBER DESIGNER SERIES
I
nstallation and repair should be done by a qualified service person. The appliance should be inspected before use
and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint
from carpeting, bedding material, etc. It is imperative that control compartments, burners and circulating air pas-
sageways of the appliance be kept clean.
Before operating this appliance, have a qualified
technician:
Review proper placement of logs, rock wool and
vermiculite.
Check wiring.
Check the air shutter adjustment.
Ensure there are no gas leaks.
Ensure the glass is sealed and in proper position.
Ensure the flow of combustion and ventilation air
is not obstructed.
1. Standing Pilot Operation
Turn the wall switch to “ON”.
Turn the wall switch to “OFF”.
Turn all wall switches to “OFF”
Turn pilot knob on valve to “OFF”
Turn the manual shutoff valve to “CLOSED”
To relight the pilot and appliance, see
page 16.
01/04
J. SEASONAL CHECKLIST
WARNING!
CAUTION:
WARNING!
WARNING!
2. Intermittent Pilot Ignition Operation
Turn the wall switch to “ON”.
Turn the wall switch to “OFF”.
Turn all wall switches to “OFF”
Turn the manual shutoff valve to “CLOSED”
To relight the appliance, see page 15.
17

Advertisement

Table of Contents
loading

Table of Contents