Heatilator CALIBER DESIGNER B-VENT SERIES Installation And Operating Instructions Manual page 14

Hide thumbs Also See for CALIBER DESIGNER B-VENT SERIES:
Table of Contents

Advertisement

8. Place the Vermiculite and Lava Rock
Place the vermiculite and lava rock around, but not
on, the burner. See Figure 17. It is not necessary to
use the entire bag. Save the remainder for future use.
9. Place the Rock Wool
Place a small amount of 1/2” diameter pieces (dime-
size) of rock wool on the burner pan so that the rock
wool touches but does not cover the holes in the burner
pan. This will provide the “glowing embers” look. See
Figure 17. It is not necessary to use the entire bag.
Save the remainder for future use.
10. Replace the Glass and Screen
See page 20 of this manual.
14
WARNING - RISK OF CARBON MONOXIDE!
WARNING - RISK OF CARBON MONOXIDE!
INSTALLATION IS COMPLETE
33795 Rev i
CALIBER DESIGNER SERIES
01/04

Advertisement

Table of Contents
loading

Table of Contents