Adjusting The Exposure For Backlit Subjects; Recording In Mirror Mode; Back Light - Sony HANDYCAM DCR-DVD408 Operating Manual

Rec0_di_# {C0_ti_ed)
Infrared port
Set the NIGHTSHOT switch to ON. (1_
appears.)
O Notes
• Tile NightShot mM Super NightShot fimctions
use inlrarcd light. Theretbre, do not cover tile
hlffared poJr with your fingers or off,m o[_iects,
and l-emme tim convcrsion lens lopfiomd).
• A@lst tim locus manually ![FOCUS[, p. 781
when it is haM to _bcus mllomafically.
• Do not u_ the NightShol and Super N]ghtShot
hu_ctions in bl'ighl places. This may cruise u
malfunction.
"_° Tips
• To rccoM an image brighter, use [SUPER
NIGHTSHOTI fimcfion (p. 81). To rccord an
image more laithlhlly to the original colors, use
[COLOR SLOW SHTRI lunction (p. 81).
Open the LCD panel 90 degrees to the
camcorder/@/, then rotate it 180 degrees
to the lens side (@).
"_° Tips
• A mirror-linage ol the subject appears on the
LCD screcn, but the image will be normal when
recorded.
POWER switch
BACK LIGHT
To adjust the exposure for backlit subjects.
press BACK LIGHT to display I_. To
cancel the back light function, press BACK
LIGHT again.
WIDE SELECT
Toselecttheaspect r atioofthe
movies
Turn the POWER switch until the
(Movie) lamp turns on. and press
WIDE SELECT repeatedly to select the
desired screen aspect ratio.
"{" Tips
• Ditlia-ences in the angle of view betwecn 16:9
(wide) and 4:3 vary depending on the zoom
position.
38