Sony HANDYCAM DCR-DVD408 Operating Manual page 48

Mak[a@th÷ dis_ co_pa?[N÷ wRh Nayback oa o?h÷_devices o_ DVDdHv÷s
O Notes
• It takes fl'om a mhmte to a maximum ol _veral
hours to finalize a disc. Tile shorter the amount
of material recorded on the disc, tile longer it
takes lor finalizing.
• Use the AC Adaptor as the power source to
prcvent your calncorder l]'om
r/inning ()/it
ol
power during finalizing.
• When you finalize a double-sided disc, you
nmst linalizc each side of the disc individually.
Place your camcorder in a stable
position, and connect the AC
Adaptor to the DC IN jack on your
camcorder.
i Turn on the power by turning the
POWER switch.
3
Insert the disc that you want to
finalize.
4
Touch _[:_(MANAGE DISC/
MEMORY) of the _ [HOME)
menu -+ [FINALIZE].
To select
a DVD menu style, touch
@=2=(OPTION) _ [DVD MENU]
(p. 49).
Go to step 5 if you want to fin:dize the
disc using [STYLEI ]/default setting/.
5 Touch [YES] -* [YES].
Finalizing starts.
6
When [Completed.] appears,
touch FU_I.
O Notes
• Do not apply shock or vihration to your
camcoMer, mid do not disconnect tile AC
Adaptor during finalizing.
When you need to disconnect tile AE"Adaptor.
nlake sure thai tile power ol your caIllcorder is
set to oil and disconnect file A(-" Adaptor alicr
tile _ (Movie) or _ (Still) lamp goes oil
Finalizing restarts when you connect the AC
Adaptor and 1111"11 on your camcorder again.
You cannot remove tile disc until tile finalizing
operation is completed.
• When using the discs other than DVD-RW (VR
mode), @ _ flashes alter finalizing is
completed on the recording standby screen of
your ca[llcorder. Rcnlove the disc lroll/ your
camcorder.
"_° Tips
• _Vhell you set [o crea[e a DVD l/lenu and
linalize tile disc, tile DVD nlenu appears lor a
lew seconds while finalizing the disc.
• After the disc is finalized, the disc type/
recording lormat indicator changes as shown
below:
DVD-RW (VIDEO mode) ,_:--k_)
DVD-RW/VR mode) :-RW2>
DVD+RW <_g,,v
DVD-R
DVD+R DL
48