Seats
Adjusting Power Seats, Front
The sw itches are located in each fro n t
door.
Turn key to steering lock position " 2 "
(with the driver's door opened, the
pow er seats can also be operated
with the key removed or in steering
lock positions " 1" or ' '0 " ).
18
Seat and Head Restraint A djustm ent:
A
Seat cushion adjustm ent.
B
Seatback adjustm ent.
C
Head restraint adjustm ent.
A d just head restraint to support
the back of the head approxi
mately at ear level. The head res
traint can also be turned forward
by hand.
Note:
The head restraint should not be
pulled up past the detent when
making adjustm ents.
Warning!
Do not make adjustm ents with vehicle
in motion.
Storing seat and safety head restraint
positions in memory:
D Mem ory button.
E
Position buttons " 1" and " 2" .
Two sets of seat/head restraint posi
tions may be program m ed in memory.
A fte r the seat and head restraints are
positioned, push mem ory button D,
and w ithin 3 seconds push position
button " 1" . The second set of posi
tions fo r the seat and head restraint
can be stored by pushing position
buttons D and " 2 " .
Recalling seat and head restraint
positions stored in mem ory :
To recall a seat/head restraint posi
tion, push position button " 1" or " 2"
until seat/head restraint movement
has stopped. For safety reasons, the
seat/head restraint m ovem ent stops
after releasing the position button.
Warning!
Do not make adjustm ent with vehicle
in motion.
To remove head restraint refer to
" Practical H ints" .
Note:
Prior to operating the vehicle, the
driver should adjust the seat height
fo r proper vision as well as fore/aft
placem ent and seat back angle to