8. You will be presented with the SCS Interface.
9. The SCS can now be configured with the required gateways.
Gateway Configuration from the SCS - (FXO/T1/E1/PRI)
The SCS system can be configured, so that local users can dial using the PSTN
services of the gateway. In this example, an SCS will be configured for dialling out
to the PSTN via the 2330 gateway.
This procedure is completed in two steps:
Add to the SCS and configure as an unmanaged gateway.
Configure a dialling plan rule on the SCS that references the gateway.
To configure the unmanaged gateway in SCS:
1. From the SCS main interface, select Devices followed by Gateways.
NN40010-551 Issue 1.3 SCS 4.0
AG 2330 Installation Reference
11