Table of Contents
Advertisement
TROUBLESHOOTING
Problem
The oven is not working.
The display shows the letter "F"
followed by a number.
USEFUL TIPS
HOW TO READ THE COOKING TABLE
The table indicates the best function to use for any
given food, to be cooked on one or more shelves at the
same time. Cooking times start from the moment food
is placed in the oven, excluding pre-heating (where
required). Cooking temperatures and times are purely
for guidance and will depend on the amount of food
and type of accessory used. Please use the lowest
recommended settings to begin with and, if the food
is not cooked enough, then switch to higher settings.
Please use the accessories supplied and preferably
dark-coloured metal cake tins and baking trays. You
can also use Pyrex pans and accessories or ones made
from china, but bear in mind that cooking times will be
slightly longer.
COOKING DIFFERENT FOODS AT THE SAME TIME
Using the "Forced Air" function, you can cook different
foods which require the same cooking temperature at
the same time (for example: fish and vegetables), using
PRODUCT FICHE
The product fiche with energy data of this
WWW
appliance can be downloaded from the website
docs.hotpoint.eu
HOW TO OBTAIN THE USE AND CARE GUIDE
>
Download the Use and Care Guide
WWW
from our website docs.hotpoint.eu (you can
use this QR Code), specifying the product's
commercial code.
> Alternatively, contact our Client After-sales Service
8
WWW
Possible cause
Disconnection from the mains
electricity.
Fault.
Software fault.
WWW
different shelves. Remove the food which requires a
shorter cooking time and leave the food which requires
a longer cooking time in the oven.
BREAD AUTO FUNCTION
For best results you should carefully follow the
instructions, using the recipe for mixing 1000 g of
dough: 600 g of flour, 360 g of water, 11 g of salt, 25 g of
fresh yeast (or two packets of yeast powder).
For optimal rising, allow about 90 minutes at room
temperature or 60 minutes in the oven using the
"Rising" function.
Put the dough into the (cold) oven, pour 100 cc of
cold drinking water on to the bottom of the oven and
activate the "Bread Auto" function. After cooking, leave
the dough to stand on a wire shelf until completely
cooled.
CONTACTING OUR AFTER-SALES SERVICE
You can find our
contact details in the
warranty manual. When
contacting our Client
After-sales Service,
please state the codes
provided on your
product's identification
plate.
Download the Use and Care Guide from docs.hotpoint.eu for
Solution
Make sure that the oven is connected
to the main electricity supply.
Turn off the oven and restart it to see if
the fault persists.
Contact you nearest Client After-sales
Service Centre and state the number
following the letter "F".
Download the Use and Care Guide from docs.hotpoint.eu for
XXXXXXXX X XX
XXXXXXXXXX
XXXXXXXXXX
more information
more information
Model: xxxXXXXxx
XXXXXX XXXXXX
XXXXX XXXXXXX
XXXXXX
400011159409
Advertisement
Table of Contents
