Table of Contents
Advertisement
Quick Links
DAILY REFERENCE
GUIDE
THANK YOU FOR PURCHASING AN
HOTPOINT PRODUCT
To receive more comprehensive help and
support, please register your product at
www. hotpoint. eu/ register
Read the safety instructions carefully before using the product
PRODUCT DESCRIPTION
1
2
3
4
5
CONTROL PANEL
1
1.
SELECTION KNOB
For switching the oven on by
selecting a function.
Turn to the
position to switch
the oven off.
2.
LIGHT
With the oven switched on, press
to turn the oven compartment
lamp on or off.
WWW
2
3
4
3.
SETTING THE TIME
For accessing the cooking time
settings, delayed start and timer.
For displaying the time when the
oven is off.
4.
DISPLAY
You can download the Safety Instructions
and the Use and Care Guide by visiting our
website docs.hotpoint.eu and following
the instructions on the back of this booklet.
1. Control panel
2. Fan
3. Lamp
6
4. Runners for accessories
(the level is indicated on the wall
of the cooking compartment)
5. Door
6. Upper heating element/grill
7
7. Identification plate
(do not remove)
8. Bottom heating element
(non-visible)
8
5
5.
ADJUSTMENT BUTTONS
For changing the cooking time
settings.
6.
THERMOSTAT KNOB
Turn to select the temperature you
require when activating manual
functions. Automatic functions use
.
EN
6
1
Advertisement
Table of Contents
Related Manuals for Hotpoint SA2 544 C IX
Summary of Contents for Hotpoint SA2 544 C IX
- Page 1 You can download the Safety Instructions HOTPOINT PRODUCT and the Use and Care Guide by visiting our To receive more comprehensive help and website docs.hotpoint.eu and following support, please register your product at the instructions on the back of this booklet. www. hotpoint. eu/ register...
- Page 2 ACCESSORIES Download the Use and Care Guide from docs.hotpoint.eu for more information WIRE SHELF BAKING TRAY The number of accessories may vary depending on which model is purchased. Other accessories can be purchased separately from the After-sales Service. INSERTING THE WIRE SHELF AND OTHER •...
-
Page 3: Using The Appliance For The First Time
USING THE APPLIANCE FOR THE FIRST TIME SETTING THE TIME REHEAT THE OVEN You will need to set the time when you switch on the A new oven may release odours that have been left appliance for the first time: Press behind during manufacturing: This is completely until the icon and the current time start flashing... - Page 4 PROGRAMMING THE END COOKING TIME/DELAYED START After a cooking time has been set, starting the function can be delayed by programming its end time: Press until the icon and the current time start flashing on the display. to set the time you want cooking to end and press to confirm.
-
Page 5: Cooking Table
COOKING TABLE FUNCTIONPREHEAT TEMPERATURE DURATION LEVEL AND RECIPE (°C) (MIN) ACCESSORIES 160-180 30-90 Leavened cakes 160-180 30 - 90 *** 160–200 35-90 Filled cake (cheesecake, strudel, fruit pie) 160–200 35 - 90 *** 170 - 180 15 - 45 Biscuits/tartlets 160-180 20-45 *** 180 - 220... - Page 6 * Turn food halfway through cooking Download the Use and Care Guide from ** Turn food two thirds of the way through cooking (if docs.hotpoint.eu for the table of tested recipes, necessary). compiled for the certification authorities in *** Switch levels halfway through cooking.
-
Page 7: Maintenance And Cleaning
MAINTENANCE AND Download the Use and Care Guide from docs.hotpoint.eu for more information CLEANING Do not use steam cleaning Carry out the required Do not use wire wool, abrasive equipment. operations with the oven cold. scourers or abrasive/corrosive cleaning agents, as these could... -
Page 8: Troubleshooting
> Download the Use and Care Guide XXXXXXXX X XX XXXXXX XXXXXX XXXXX XXXXXXX Model: xxxXXXXxx plate. from our website docs.hotpoint.eu (you can XXXXXXXXX X X X XXXXXXXXXX XXXXXXXXXX XXXXXX use this QR code), specifying the product's commercial code. > Alternatively, contact our Client After-sales Service...