Editing; Dubbing A Tape - Sony Handycam DCR-TRV340E Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
You can dub or edit on the VCR connected to
your camcorder using your camcorder as a
player.
Connect your camcorder to the VCR using the
A/V connecting cable supplied with your
camcorder.
Before operation
•Set DISPLAY to LCD in the menu settings. (The
default setting is LCD.)
•Press the following buttons to make the
indicators disappear so that they will not be
superimposed on the edited tape:
– DISPLAY
– DATA CODE on the Remote Commander
– SEARCH MODE on the Remote Commander
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2) Prepare the VCR for recording, then set the
input selector to LINE.
Connect the A/V connecting cable to the
AUDIO/VIDEO jack. Refer to the operating
instructions of your VCR.
(3) Set the POWER switch to PLAYER on your
camcorder.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your
VCR.
: Signal flow/
•
•
(1)
(2)
(3)
(4)
(5)
S VIDEO OUT
A / V OUT
IN
S VIDEO
VIDEO
AUDIO
VCR
93