Inserting A Scene - Sony Handycam DCR-TRV340E Operating Instructions Manual

Inserting a scene

You can insert a scene in the middle of a
recorded tape by setting the start and end points.
The previously recorded frames between these
start and end points will be erased.
Use the Remote Commander for this operation.
(1) In the standby mode, keep pressing
EDITSEARCH, and release the button at the
insert end point [b].
(2) Press ZERO SET MEMORY on the Remote
Commander.
The ZERO SET MEMORY indicator flashes
and the counter resets to zero.
(3) Keep pressing the – 7 side of EDITSEARCH
and release the button at the insert start point
[a].
(4) Press START/STOP to start recording.
The scene is inserted. Recording stops
automatically near the counter zero point.
Your camcorder returns to the standby mode.
ZERO SET
MEMORY
80
[a]
[b]
(1)
(2)
(3)
(4)
[b]
7
[a]
EDITSEARCH