Trv140 Only - Sony DCR-TRV140 Operating Instructions Manual

Viewing the recording on TV
If your TV is already connected to a VCR
Connect your camcorder to the LINE IN input on the VCR by using the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
If your TV is a monaural type (DCR-TRV140 only)
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the TV. If you connect the white plug,
the sound is L (left) signal. If you connect the red plug, the sound is R (right) signal.
To connect to a TV without Video/Audio input jacks (CCD-TRV107/
TRV108/TRV308/TRV408/TRV608 only)
Use an NTSC system RFU adaptor (optional.)
Refer to the operating instructions of your TV and the RFU adaptor.
If your TV is a stereo type (CCD-TRV107/TRV108/TRV308/TRV408/
TRV608 only)
Connect the audio plug of the A/V connecting cable supplied to the left (white) input
jack of your TV.
If your TV has an S video jack
Connect using an S video cable (optional) to obtain optimum quality screen images.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks on both your camcorder and the
TV.
To display the screen indicators on TV
Set DISPLAY to V-OUT/LCD in the menu settings (p. 112). Then press DISPLAY on
your camcorder. To turn off the screen indicators, press DISPLAY on your camcorder
again.
39