Releasing The Steady Shot Function; (Ccd-Tr96 /Tr916 Only).42 - Sony Handycam CCD-TR86 Operating Instructions Manual

Releasing the STEADY SHOT function
- CCD-TR96/TR916 only
When you shoot, the '(0» indicator appears. This indicates that the SteadyShot function
is working and the camcorder compensates for camera-shake.
You can release the SteadyShot function when you do not need to use the SteadyShot
function. Do not use the SteadyShot function when shooting a stationary object with a
tripod.
Set STEADY SHOT to OFF. The «0» indicator goes off.
To activate the SteadyShot function again
Set STEADY SHOT to ON.
Notes on the steady shot
• The SteadyShot will not correct excessive camera-shake.
• When you switch the SteadyShot function on or off, the exposure may fluctuate.
• When you record in 16:9FULL mode, the SteadyShot function does not work and the
«Q)i indicator flashes.