Searching for a photo – Photo search/Photo scan
Scanning photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo
scan indicator appears.
The indicator changes as follows:
DATE SEARCH
no indicator
(3) Press . or > on the remote commander.
Each photo is played back for about 5 seconds automatically.
2
SEARCH
MODE
3
To stop scanning
Press x.
If a tape has a blank portion in the recorded portions
The photo search and photo scan functions may not work correctly.
PHOTO SEARCH
T
PHOTO SCAN
PHOTO
00
SCAN
T
71