Warning indicators and messages
Warning messages
•CLOCK SET
•FOR "InfoLITHIUM" Use an "InfoLITHIUM" battery pack (p. 14).
BATTERY ONLY
•
CLEANING CASSETTE
•
FULL
•
16BIT
•
REC MODE
•
TAPE
•
"i.LINK" CABLE i.LINK cable is connected (p. 107).* You cannot dub new sound.
•
FULL
•
•
NO FILE
•
NO MEMORY STICK
•
MEMORY STICK ERROR
• FORMAT ERROR
•
DIRECTORY ERROR
• COPY INHIBIT
•
TAPE END
•
NO TAPE
* You hear the melody or beep sound.
184
Reset the date and time (p. 129).
The video heads are dirty (p. 196).
The tape cassette memory is full.
AUDIO MODE is set to 16BIT (p. 116).* You cannot dub new sound.
REC MODE is set to LP (p. 116).* You cannot dub new sound.
There is no recorded portion on the tape. You cannot dub new sound.
The "Memory Stick" is full.* (DCR-TRV11E/TRV20E only)
The write-protect tab on the "Memory Stick" is set to LOCK (p. 131).*
(DCR-TRV11E/TRV20E only)
No still image is recorded on the "Memory Stick" (p. 155).*
(DCR-TRV11E/TRV20E only)
No "Memory Stick" is inserted (p. 133). (DCR-TRV11E/TRV20E only)
The "Memory Stick" data is corrupted.(DCR-TRV11E/TRV20E only)
The "Memory Stick" is not recognized. Check the format (p. 132).
(DCR-TRV11E/TRV20E only)
There is more than two same directories.
The tape contains copyright control signals for copyright protection of
software (p. 172).*
The tape has reached the end of the tape (p.40).*
Insert a cassette tape (p. 20).*