Dubbing/Editing; Connecting To A Vcr Or Tv - Sony Handycam DCR-PC330E Operation Manual

Dubbing/Editing

Connecting to a VCR
or TV
A/V jack
A/V connecting cable
(supplied)*1
Signal flow
*1 The supplied A/V connecting cable has a video
plug and an S video plug for the video connection.
*2 This connection produces higher quality DV
format pictures. When there is an S video jack on
the device to be connected, connect the S video
plug to that jack instead of using the yellow video
plug. The audio will not be output when you
connect with the S video plug alone.
b Notes
• Use the A/V connecting cable to connect your
camcorder to other devices. Before connecting,
make sure the [DISPLAY] setting in the
(STANDARD SET) menu is set to [LCD PANEL]
(the default setting) (p. 81).
• When you are connecting your camcorder to
monaural device, connect the yellow plug of the A/
86
Dubbing/Editing
You can record the picture from a VCR or TV
to a tape or a "Memory Stick" inserted into
your camcorder (p. 87). You can also create a
copy of the picture recorded on your
camcorder on other recording device (p. 87).
Connect your camcorder to a TV or VCR as
shown in the following illustration.
Connecting with an i.LINK cable
i.LINK cable (optional)
DV Interface
When you have an S video jack on your
TV or VCR *2
S video plug
(black)
Yellow
White
Red
V connecting cable to the video jack, and the red or
the white plug to the audio jack on the VCR or the
TV.
To use an i.LINK cable for connection
Use an i.LINK cable (optional) to connect your
camcorder to other device via the
Interface. The video and sound signals are
transmitted digitally, producing high quality
pictures. Note that you cannot record the picture
and sound separately. For details, see page 121.
i.LINK jack
VCRs or TVs
DV