Job Specification Sheet - Hellenbrand H-125 Series Owner's Manual

Water conditioning system

Hide thumbs Also See for H-125 Series:

Owner's manual (24 pages)

Specification sheet (2 pages)

Table Of Contents

Table of Contents

MODEL NO. __________________________________________________________________________________________

*WATER TEST AT TIME OF INSTALLATION

_______ Hardness CaCo

_______ Iron (ppm)

_______ pH

OPTIONAL RELAY SETTINGS

_______ Off

Relay 1 Trigger

_______ On Time

_______Start Time, Minutes into Regeneration

_______Run Time

_______ On Gallons

Pulse per _______ Gallons

_______ Time Relay Closed

_______ On Regen Gallons

(Relay activated on gallons through meter during

regeneration and service flow)

Pulse per _______ Gallons

_______ Time Relay Closed

_______ On Service Alarm

_______ On Lockout

*SIZING INFORMATION

All Water is Softened Except:

_______ Rear Hose Bib

_______ Other ________________________________________________________________________________________

The average family uses 50 gallons per person daily for all water uses in the home, about 30 gallons per person daily if soft water

is not supplied to the toilets, and about 20 gallons per person daily if only hot water is softened.

_______ Daily Water Usage (Gallons/Person)

x _______ Family Size (Number of people in family)

= _______ Total Gallons Per Day

x _______ Grains Per Gallon of Hardness

(Note: Add 3 grains per gallon of hardness for each ppm iron for total compensated hardness)

= _______ Total Grains Per Day

*INSTALLATION DATE _________________________________________________________________________________

*SERIAL NUMBER ____________________________________________________________________________________

NOTES ______________________________________________________________________________________________