Step 3 Adjusting the LCD screen and the viewfinder
Adjusting the angle and the brightness of the LCD screen
Adjust the brightness and the angle of the LCD screen properly in your sight.
LCD BACKLIGHT
button
1
Open the LCD screen.
2
Adjust the direction of the LCD screen to the desired position.
When you adjust the angle of the LCD screen, make sure if the LCD screen is
opened up to a full 90 degrees.
You can turn the LCD screen over and then fold it back to the camcorder body
with the LCD screen facing out as shown below.
To adjust the brightness of the LCD display
1
Turn the power on by pressing the POWER button for a few seconds.
2
Press SETUP.
The SETUP display appears.
3
Use the multi-selector to select
Refer to page 23 to see how to use the multi-selector.
20
2
180°
90°
90°
1
MANUAL SET
PROGRAM AE
P EFFECT
D EFFECT
WHT BAL
AUTO SHTR
[ SETUP ] : END
LCD / VF SET
LCD BRIGHT
LCD B. L.
LCD COLOR
VF B. L.
RETURN
[ SETUP ] : END
(LCD/VF SET).