Step 4: Adjusting The Lcd Screen And Viewfinder - Sony HANDYCAM DCR-DVD703 Operating Manual

Step 4: Adjusting the LCD screen and viewfinder
The LCD screen
Open the LCD screen 90 degrees to the
camcorder ( ), then rotate it to the best

angle to record or play (
DISP/BATT INFO
180 degrees
(max.)

90 degrees
(max.)
Be careful not to press the buttons on the LCD
•
frame accidentally when you open or adjust the
LCD screen.
If you open the LCD screen 90 degrees to the
•
camcorder, then rotate it 180 degrees to the lens
side, you can close it with the LCD screen side
facing out. This is convenient during playback
operations.
To darken the LCD screen
Press and hold DISP/BATT INFO for a few
seconds until appears.
This setting is practical when you use your
camcorder in bright conditions or you want
to save battery power. The recorded picture
will not be affected by the setting. To
cancel, press and hold DISP/BATT INFO
until disappears.
See [LCD/VF SET] - [LCD BRIGHT] (p.66) to
•
adjust the brightness of the LCD screen.
).


90 degrees to the
camcorder
The viewfinder
You can view pictures using the viewfinder
to avoid wearing down the battery, or when
the picture seen on the LCD screen is poor.
Viewfinder
Extend the viewfinder
until it clicks.
Viewfinder lens
adjustment lever
Move it until the picture
is clear.
You can adjust the brightness of the viewfinder
•
backlight by selecting [LCD/VF SET] - [VF
B.LIGHT] (p.67).
The recorded picture will not be affected by
the setting.
21