GPON Terminal
HG8010 series
HG8110 series
HG8240 series
HG8242 series
NOTE
If the appearance of the product in this document differs from the actual product, the actual product
prevails.
Installing the GPON Terminal
Caution
1. Do not install GPON terminals outdoors or on the outdoor cabinets.
2. GPON terminals can be mounted onto a wall or be placed on a workbench. Do not install GPON
terminals in other modes, such as the ceiling.
3.The terminal cannot be connected to other devices such as GPON terminals, switch and router.
The schematic diagram for placing the device on a desk horizontally are as
follows:
The procedure and schematic diagram for placing the device on a desk
vertically (only some products support this mode) are as follows:
Step 1 Install a base on the installation hole of the GPON terminal.
Step 2 Place the GPON terminal with the base, for example, an HG8110 on the
workbench vertically.
Weight
(Including the Power Adapter)
About 450 g
About 450 g
About 500 g
About 750 g
3
Maximum System
Power Consumption
≤ 6 W
≤ 7 W
≤ 12 W
≤ 14 W